skip to main | skip to sidebar

Bodge It Quick Rep Strap Bertha Project

Inspired by HydraRaptor this Blog is my attempt at creating a RepStrap machine this is based on the RepStrap sub-project to build a RepRap machine without owning a working RepRap.

Wednesday, July 29, 2009

Follow the link to Repstrap Dawin for


> Making 20 Diagonal tie brackets & 4 anti vibration feet <


Posted by BodgeIt at 4:06 PM
Labels: BandQ Fixing Block White, Fixit Blocks, White Assembly Joint

0 comments:

Post a Comment

Newer Post Older Post Home
Subscribe to: Post Comments (Atom)

About Me

My Photo
BodgeIt
Winsford, Cheshire, United Kingdom
View my complete profile

Followers

Share it

Blog Archive

  • ►  2011 (3)
    • ►  October (1)
      • BIQs 1st day @ Bang Goes the Theory Live Mancheste...
    • ►  July (1)
      • The only takeaway 3D printer Kit so far...
    • ►  March (1)
      • Huxley Seedling is at MakerFaire UK 2011
  • ►  2010 (36)
    • ►  November (2)
      • Bodge & Midge Visit Fab Lab Manchester.
      • Been busy.
    • ►  October (5)
      • New Hot End ~ Peak insulator melts~ as Thermocoupl...
      • Before and After fixing Y axis wobble
      • Quick Problem update
      • Beginners luck.... ran out Warping warping nothing...
      • Its been a good day for firsts.
    • ►  September (4)
      • Quick update
      • Connections for adding the Worm drive extruder ste...
      • BodgeIts Ardrino /Sanguino Motherboard 1.1 Pin / f...
      • BodgeIt is RepRapping in the Home Office at last!!...
    • ►  August (1)
      • Bodgeit has moved to into the Home Office at last....
    • ►  July (3)
      • Makerbot RS485 ~ Extruder board: Null version repo...
      • Wey hey !!! The Beta 18 version of replicator G lo...
      • The Home office is very nearly ready for moving in...
    • ►  April (1)
      • Darwins and Mendels New home has risen off the gro...
    • ►  February (6)
      • Rep strap Mini/Micro Mendel Heated Bed using Fire ...
      • Unseen problems with buying SMT components.
      • KIcad the Etch a sketch for Grown Ups --Yay
      • 4.7kg pull Extruder drive using Meccano Worm gear
      • Bodgits definitive guide to Flashing Boot loaders...
      • CALL FOR ALL REPRAPPERS – MAKER FAIRE 2010 IN NEWC...
    • ►  January (14)
      • Nopheads small heated bed made from scrap.
      • I'm going to MAKERFAIRE 2010!
      • Wow Nopheads drive system is the killer App of Rep...
      • Plastic Block RapTruder based on the "No compromi...
      • Mendel gear creation gears that failed to get a g...
      • making Mendel element on Welding tip and Torque te...
      • The Spline cutter worked great
      • Wow my first Toner transfer Home made PCB that is...
      • Mendel Spline cutter for Mendel Extruders made fro...
      • Making the Mendel Extruder Block
      • Second Extruder head build for Mendel with drawing...
      • Mendel all Belted Up on the Y Axis
      • Mendel Electronics
      • Extruder controller V2.1 fixing the reset switch ...
  • ▼  2009 (21)
    • ►  December (10)
      • BodgeIt broke on Boxing day and was taken to Hospi...
      • Mendel stand / base board to keep it neat and tran...
      • Reducing the number of skate bearings from 32 to 2...
      • The Mendel X Slider and its Skate bearing boggie...
      • The Snow today means its another Mendel Day
      • Mendel build Day Two
      • Sunday Oops This Computer has hard drive Failure
      • My uninerversal vitamin The Nylon Corner Block
      • Experiments with off the shelf Amtel processor boa...
      • My first Extruder build and testing
    • ►  October (1)
      • Off subject as been busy gardening.
    • ►  September (5)
    • ►  August (2)
    • ▼  July (1)
      • Follow the link to Repstrap Dawin for
    • ►  March (1)
    • ►  January (1)
  • ►  2008 (6)
    • ►  November (1)
    • ►  October (4)
    • ►  August (1)

My Blog List

  • RepRap: Blog
    RepRap Community Masterclass in Bath, UK - I wouldn't normally use this blog to trail my company's activities, but this seems an appropriate exception: RepRapPro Ltd is running a RepRap Community ...
    1 week ago
  • HydraRaptor
    Mendel90 finishing touches - I have tweaked a lot of things since building the prototype. The design is fully parametric meaning each part works out how big it should be from basic par...
    2 weeks ago
  • RepRap: Builders
    Been a while, but I am still going - Hi all, it has been a long time, but I have something to show. I have the 3 axes working now. I connected a pen and drew some lines and made a 5 x 5 inch sq...
    2 months ago
  • Reprap's Main web
    DavidBuzz - Name: David Buzz Email: davidbuzz@gmail.com Company Name: Company URL: Country: Australia Comment: My Links .WelcomeGuest to learn TWiki Sandbox.WebHome we...
    2 years ago